Published at Tuesday, November 27th 2018. by Cara Hurley in Kitchen Backsplash.
So the first thing you need to do to prepare is the layout is extremely important, especially when you got a feature like this, and you need to know exactly where your feature is gonna go before you start to put some lines on the wall and determine Exactly the position of your feature, once you know the position of your feature, then you need to take into consideration the rest of the backsplash and no more or less where all your cuts are gonna be has a lot of elements to it.
Is God the 3x6 tumbled marble has got the chair, rail, tumble, marble? It's got the black mosaic border and it's also got the tumbled marble mosaic tile in the inside the feature the best way to approach something like this is to get as much of it cut. As possible before you actually put it on the wall, so I lay it out on a flat surface. In this case, I use the actual countertop and I cut as much of it as I possibly could so that I could just pick it up and put it in place. I'm not you're ready to start installing. So, first of all, you gotta, get a ledger board between the space of the countertops, where the stove goes and then you're going to put some adhesive on the wall.
In this case, I used mastic because there's no wet area. You just want to make sure that you use a monastic that is good for marble because some mastic can stay in the mob and then very carefully and patiently. You just stop picking up the pieces and moving them over to your wall and put them in place and I'm using sixteenth of inch horseshoe spaces here to make sure that nothing, slides down and everything has the correct grout line between them. Once you have everything that was per-cut on the wall now you're gonna do the rest, which is those little parts of the curve that needs to be cut in one at a time and just put in place.
As you know, all along this, you want to make sure that that you keep it neat, you keep it straight and don't rush it make sure that the mastic that you put on the wall has not skinned over and that it's still sticking to the tile and Once this part is done, the really hard part is finished. The rest of the backsplash, it's gonna, be a lot easier. So take your time and don't rush and make sure everything stays in place as you move along with this feature, it's time to move along to the rest of the peel tile. Now, this should have been laid out so that you know what kind of cuts you're gonna get and you don't want to get any slivers anywhere.
Any content, trademark’s, or other material that might be found on the paranormaali.com website that is not paranormaali.com’s property remains the copyright of its respective owner/s. In no way does paranormaali.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 paranormaali.com. All Rights Reserved.